H3C S5100-SI

2-1
2 Correspondence Between Documentation and
Software
Manual List
Manual name
Corresponding
Product
H3C S5100-SI/EI Series Ethernet Switches Installation Manual
H3C S5100-SI/EI Series Ethernet Switches Quick Start
H3C S5100-SI/EI Series Ethernet Switches Compliance and Safety Manual
H3C S5100-SI/EI Series Ethernet Switches Operation Manual-Release
220X Series
H3C S5100-SI/EI Series Ethernet Switches Command Manual-Release
220X Series
S5100-SI series
S5100-EI series
Software Version
H3C S5100-SI/EI Series Ethernet Switches Operation Manual-Release 220X Series and H3C
S5100-SI/EI Series Ethernet Switches Command Manual-Release 220X Series are for the software
version of Release2200, Release2201 and Release2203P08 of the S5100-SI/EI series products.
The supported features are different between these software versions. For details, refer to 错误！未找
到引用源。.
Table 2-1 Added and Modified features compared with the earlier software version
Software
Version
Added and Modified Features Compared With The
Earlier Version
Manual
RADIUS Attribute Ignore Function 15-AAA
DHCP Relay Agent Function 18-DHCP
The S5100-SI series begin to support Layer 2
ACLs from Release 2203P08 on
The S5100-SI series begin to support
assignment of ACLs to hardware for packet
filtering from Release 2203P08 on
19-ACL
Configuring the network management interface
for a cluster ( S5100-EI series only )
Configuring the Cluster Synchronization
Function
23-Stack-Cluster
UDP Helper Function 38-UDP Helper
Release
2203P08
Added
features
Access Management Function
39-Access
Management