H3C S5100-SI

5-6
View Available operation Prompt example Enter method Quit method
SFTP client
view
Configure SFTP client
parameters
sftp-client>
Execute the sftp
command in
system view.
MST region
view
Configure MST region
parameters
[Sysname-mst-re
gion]
Execute the stp
region-configurati
on command in
system view.
Cluster view
Configure cluster
parameters
[Sysname-cluster
]
Execute the
cluster command
in system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Configure the RSA
public key for SSH
users
[Sysname-rsa-pu
blic-key]
Execute the rsa
peer-public-key
command in
system view.
Public key
view
Configure the RSA or
DSA public key for
SSH users
[Sysname-peer-p
ublic-key]
Execute the
public-key peer
command in
system view.
Execute the
peer-public-ke
y end
command to
return to system
view.
Edit the RSA public
key for SSH users
[Sysname-rsa-ke
y-code]
Public key
editing view
Edit the RSA or DSA
public key for SSH
users
[Sysname-peer-k
ey-code]
Execute the
public-key-code
begin command in
public key view.
Execute the
public-key-cod
e end
command to
return to public
key view.
Basic ACL
view
Define rules for a
basic ACL (with ID
ranging from 2000 to
2999)
[Sysname-acl-
basic-2000]
Execute the acl
number command
in system view.
Advanced
ACL view
Define rules for an
advanced ACL (with
ID ranging from 3000
to 3999)
[Sysname-acl-ad
v-3000]
Execute the acl
number command
in system view.
Layer 2 ACL
view
Define rules for an
layer 2 ACL (with ID
ranging from 4000 to
4999)
Only S5100-EI series
Ethernet switches
provide this view
[Sysname-acl-eth
ernetframe-4000]
Execute the acl
number command
in system view.
QoS profile
view
Define QoS profile
Only S5100-EI series
Ethernet switches
provide this view
[Sysname-qos-pr
ofile-a123]
Execute the
qos-profile
command in
system view.
RADIUS
scheme view
Configure RADIUS
scheme parameters
[Sysname-radius
-1]
Execute the radius
scheme command
in system view.
ISP domain
view
Configure ISP domain
parameters
[Sysname-isp-aa
a123.net]
Execute the
domain command
in system view.
HWPing test
group view
Configure HWPing
test group parameters
[Sysname-hwpin
g-a123-a123]
Execute the
hwping command
in system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.