H3C S5120-EI Series - Page 216

204
MED information
Media policy type : Unknown
Unknown Policy : Yes
VLAN tagged : No
Media policy VlanID : 0
Media policy L2 priority : 0
Media policy Dscp : 0
PoE PSE power source : Primary
Port PSE Priority : Critical
Port available power value: 30.0(w)
Table 46 Output description
Field Description
Global LLDP local-information The global LLDP information to be sent.
Chassis ID Bridge MAC address of the device.
System capabilities supported
Supported capabilities:
• Bridge—Switching
• Router—Routing
System capabilities enabled
Enabled capabilities:
• Bridge—Switching is enabled.
• Router—Routing is enabled.
Device class
MED device class:
• Connectivity device—Network device.
• Class I—Normal terminal device. It requires the basic LLDP discovery
services.
• Class II—Media terminal device. It supports media streams, and can
also function as a normal terminal device.
• Class III—Communication terminal device. It supports the IP
communication systems of end users, and can also function as a normal
terminal device or media terminal device.
MED inventory information of
master board
MED inventory information of the master device in IRF.
HardwareRev Hardware version.
FirmwareRev Firmware version.
SoftwareRev Software version.
SerialNum Serial number.
Manufacturer name Device manufacturer.
Model name Device model.
Asset tracking identifier Asset tracking ID.
LLDP local-information of port 1 LLDP information to be sent out port 1.
Port ID subtype Port ID type, which can be MAC address or interface name.
Port ID Port ID, the value of which depends on the port ID subtype.