H3C S5120-EI Series - Page 217

205
Field Description
Port description Port description.
Management address interface
type
Numbering type of the interface identified by the management address.
Management address interface
ID
Index of the interface identified by the management address.
Management address OID Management address object ID.
Port VLAN ID(PVID) Port VLAN ID.
Port and protocol VLAN
ID(PPVID)
Port protocol VLAN ID.
Port and protocol VLAN
supported
Indicates whether protocol VLAN is supported on the port.
Port and protocol VLAN enabled Indicates whether protocol VLAN is enabled on the port.
VLAN name of VLAN 1 Name of VLAN 1.
Auto-negotiation supported Indicates whether auto-negotiation is supported on the port.
Auto-negotiation enabled Indicates whether auto-negotiation is enabled.
OperMau Current speed and duplex state of the port.
PoE supported Indicates whether PoE is supported on the port.
Power port class
PoE device type:
• PSE—Power sourcing equipment
• PD—Powered device
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the PSE-PD pair control is available.
Power pairs
PoE mode:
• Signal—PoE via signal lines
• Spare—PoE via spare lines
Port power classification
Port power classification of the PD:
• Class 0
• Class 1
• Class 2
• Class 3
• Class 4
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Aggregation group ID, which is 0 if link aggregation is not enabled.
Maximum frame Size Maximum frame size supported.
MED information MED LLDP information.