H3C S5120-EI Series - Page 220

208
Port VLAN ID(PVID): 1
Port and protocol VLAN ID(PPVID) : 1
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled : No
VLAN name of VLAN 1: VLAN 0001
Auto-negotiation supported : Yes
Auto-negotiation enabled : Yes
OperMau : speed(1000)/duplex(Full)
Power port class : PD
PSE power supported : No
PSE power enabled : No
PSE pairs control ability : No
Power pairs : Signal
Port power classification : Class 0
Link aggregation supported : Yes
Link aggregation enabled : No
Aggregation port ID : 0
Maximum frame Size: 1536
# Display the LLDP information sent from all the neighboring devices in the form of a list.
<Sysname> display lldp neighbor-information list
System Name Local Interface Chassis ID Port ID
System1 GE1/0/1 000f-e25d-ee91 GigabitEthernet1/0/5
System2 GE1/0/2 000f-e25d-ee92 GigabitEthernet1/0/6
System3 GE1/0/3 000f-e25d-ee93 GigabitEthernet1/0/7
Table 47 Output description
Field Description
LLDP neighbor-information of port 1 LLDP information received through port 1.
Update time Time when LLDP information about a neighboring device is last updated.
Chassis type
Chassis information:
• Chassis component
• Interface alias
• Port component
• MAC address
• Network address (the IP address type, such as ipv4)
• Interface name
• Locally assigned (indicating the local configuration)
Chassis ID
ID that identifies the LLDP sending device, which can be a MAC address,
a network address, an interface or some other value depending on the
chassis type.