209
Field Description
Port ID type
Port information:
• Interface alias
• Port component
• MAC address
• Network address (the IP address type, such as ipv4)
• Interface name
• Agent circuit ID
• Locally assigned (indicating the local configuration)
Port ID Port ID, the value of which depends on the port ID type.
System name System name of the neighboring device.
System description System description of the neighboring device.
System capabilities supported
Capabilities supported on the neighboring device:
• Repeater—Signal repeating
• Bridge—Switching
• Router—Routing
System capabilities enabled
Capabilities currently enabled on the neighboring device:
• Repeater—Signal repeating is enabled.
• Bridge—Switching is enabled.
• Router—Routing is enabled.
Management address OID Management address object ID.
Port VLAN ID Port VLAN ID.
Port and protocol VLAN ID(PPVID) Port protocol VLAN ID.
Port and protocol VLAN supported Indicates whether protocol VLAN is supported.
Port and protocol VLAN enabled Indicates whether protocol VLAN is enabled.
VLAN name of VLAN 1 Name of VLAN 1.
Auto-negotiation supported Indicates whether auto-negotiation is supported.
Auto-negotiation enabled State of auto-negotiation.
OperMau Current speed and duplex state.
Power port class
PoE device type:
• PSE—Power sourcing equipment
• PD—Powered device
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the PSE-PD pair control is available.
Power pairs
PoE mode:
• Signal—PoE via signal lines
• Spare—PoE via spare lines
To Next Page
Loading...
