H3C S5120-EI Series - Page 222

210
Field Description
Port power classification
Port power classification of the PD:
• Class 0
• Class 1
• Class 2
• Class 3
• Class 4
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Aggregation group ID, which is 0 if link aggregation is not enabled.
Maximum frame Size Maximum frame size supported.
Location format
Location information format:
• Invalid—The format of the location information is invalid.
• Coordinate-based LCI—The location information is coordinate-based.
• Civic Address LCI—Typical address information.
• ECS ELIN—Telephone for urgencies.
Location Information Location information.
PoE PSE power source
PSE power type:
• Unknown—Unknown power supply
• Primary—Primary power supply
• Backup—Backup power supply
PoE PD power source
PD power type:
• Unknown—Unknown power supply
• PSE—PSE power supply
• Local—Local power supply
• PSE and local—PSE and local power supplies
PoE service type PoE service type.
Port PSE Priority
PoE power supply priority of PSE ports:
• Unknown
• Critical
• High
• Low
Port PD Priority
PoE power receiving priority of PD ports:
• Unknown
• Critical
• High
• Low
Port available power value
Available PoE power on PSE ports, or power needed on PD ports, in
watts.
TLV type Unknown basic TLV type.
TLV information Information contained in the unknown basic TLV type.