13
Saw-Spindle Moulder
B3 / B3 e-classic
General safety rules:
• Be wary of sharp edges to avoid cutting yourself, in
particular when changing the tooling.
• Risk of injury due to ejected work pieces and parts of
work pieces (e.g. branches, chips).
• Risk of injury from workpiece kickback.
• Hearing damage as a result of high noise levels.
• Risk of damage to health from dust especially when
working hard woods.
• Risk of injury through being crushed, cut, caught,
wound up or sliced.
depending on the equipment:
• Contact with the rotating saw blade and/or the
scoring unit can cause an injury.
• Danger of injury due to contact with the rotating moul-
der tool.
• Risk of injury from ejected tool pieces (e.g. cutting
pieces).
• Therefore, never stand directly in the cutting line of the
saw blade whilst it is operating (in machining or idling
mode)
2.9 Other risks
Warning: Even if the safety measures are followed, there are still certain residual risks that must be consid-
ered when working on the machine:
Safety
To Next Page
Loading...
