Chapter 4 System Configuration
© 2017 Harmonic Inc. All rights reserved. 125 Harmonic MediaGrid Release 4.1
Joining a Harmonic MediaGrid Cluster to a Windows Domain
Figure 4–2: Sample smb.conf file
Modify the file as follows:
security = ADS
workgro
up = <AD Workgroup>
realm = <AD Realm>
password server = <ADS Domain Controller FQDN>
add user script = /opt/omutils/bin/omadduser %u
winbind use default domain = no
a.
Replace <AD W
orkgroup> wit
h the name
of the ActiveDirectory Workgroup. b.
Replace <AD Re
alm> with the name
of the ActiveDirectory Realm. This is the main Samba configuration file. You should read
the
# smb.conf(5) manual page in order to understand the
options listed
# here. Samba has a huge number of configurable options
(perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use
a #
# for commentry and a ; for parts of the config file that
you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the
command "testparm"
# to check that you have not made any basic syntactic
errors.
#
#======================= Global Settings==================
[global]
log file = /var/log/samba/%m.log
max log size = 50
socket options = TCP_NODELAY SO_SNDBUF=32768
SO_RCVBUF=32768
server string = Omneon Content Bridge Samba Server
security = user
encrypt passwords = yes
preferred master = no
local master = no
domain master = no
printcap name = /etc/printcap
load printers = no
printing =
To Next Page
Loading...
