EasyManua.ls Logo

Harmonic MediaGrid - Page 140

Harmonic MediaGrid
358 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 System Configuration
© 2017 Harmonic Inc. All rights reserved. 140 Harmonic MediaGrid Release 4.1
Joining a Harmonic MediaGrid Cluster to an Apple Open Directory Domain
9. Verify passwordless SSH access, as follows:
ssh -l omauthchk -i /opt/omclb/conf/id_omauthchk <OD server> hostname
Configuring omauthremote.conf
1. From the High Bandwidth ContentBridge, copy omauthremote.conf to /etc, as follows:
cp /opt/omclb/conf/omauthremote.conf /etc/omauthremote.conf
2. Add the following settings to /etc/omauthremote.conf:
primary_server=<IP_address_or_hostname_of_OD_server> (required)
If the service account name on the Open Directory server is not “omauthchk,” then you must
also add the following:
ssh_login=<service_account_name_used>
3. Verify that you have correctly configured access to the Open Directory server, as follows:
echo “.” | /opt/omclb/sbin/omauthremote
The following shows the expected result:
omauthchk version <x.x>
.
Configuring Samba Settings on the High Bandwidth ContentBridge
IMPORTANT: Before editing /opt/omclb/conf/smb.conf, Harmonic recommends that you first save a copy.
1. Ensure that the heartbeat service (for High Availability pairs only) and gateway service are
stopped.
service heartbeat stop
service gateway stop
2. In /opt/omclb/conf/smb.conf, modify the following options:
security = DOMAIN
workgroup = <domain_name>
encrypt passwords = yes
add user script = /opt/omutils/bin/omadduser %u
auth methods = script2
auth_script2: script = /opt/omclb/sbin/omauthremote
ntlm auth = no
lanman auth = no
The password server option is not needed.
IMPORTANT: With OS X 10.11 and later, SMB signing on the High Bandwidth ContentBridge is not
supported and by default is disabled. When editing /opt/omclb/conf/smb.conf, do not set
server signing to
“required” or “auto.” When editing /etc/gateway.conf, do not set SERVER_SIGNING to ”mandatory” or “auto.”
3. Verify that /etc/resolv.conf is pointing to the correct nameserver and domain.
Configuring gateway.conf
1. Configure /etc/gateway.conf for native access to the Harmonic MediaGrid, as follows:

Table of Contents

Related product manuals