User Manual
Operation and Management
Page 4-72 (Rev. 4.1/ SW v1.60/ December 2006)
• Select one of the listed ports using the keypad. For example: PCR1.
After selection, the following menu screen lists all options for the selected
port.
PCR1
1 STAND ALONE
2 {TV1
3 {TV2
The available options are:
• STAND ALONE – This mode indicates that you can assign the
elementary stream PID. In this mode, the elementary stream is
independent of the services selected for Decoder#1 and decoder#2.
• TV1 – This mode indicates that the elementary stream is related to the
service assigned to Decoder#1.
• TV2 – This mode indicates that the elementary stream is related to the
service assigned to Decoder#2.
4.2.5.6. General Configuration
The Service General Configuration menu defines the PVR 6000 service
selection strategy (either automatic or user-defined). It also allows the operator
to instruct to the CAM (Conditional Access Module) which ES to decrypt.
To access the General Configuration menu, in the front panel control interface
go to ConfigurationÆServiceÆGeneral Configuration.
The following is the front panel General Configuration screen:
General Configuration 1-2-3-7
1 Service Strategy AUTO. Call 1st'
….
2 Service CAS Open DECODED PID’S
….
To Next Page
Loading...
