PVR 6000 Series
Professional Integrated Receiver Decoders
Page 2-15
2.5.4. Performing Serviceability Check
After installing, initializing, or configuring the IRD, maintenance checks must be
performed to ensure that the unit is serviceable. A video monitor must be
connected to the PVR 6000 to perform the check lists systematic instructions for
performing a serviceability check.
Table 2-7: PVR 6000 Serviceability Check
STEP CHECK
1 On the LCD display, the LCD status message reads "STATUS OK".
2 On the PVR 6000 front panel the two LEDs are lit green.
3 The service selected is displayed on the LCD display.
4 Video picture is displayed on monitor.
5 Audio channels left and right.
To Next Page
Loading...
