User Manual
Appendix A
Software Download
Page A-6 (Rev. 4.1/ SW v1.60/ December 2006)
WARNING
IF THE PVR 6000 IS, FOR ANY REASON, SHUT DOWN DURING
SOFTWARE DOWNLOAD, THE PROGRAM MUST BE REINSTALLED
THROUGH BOOT SOFTWARE DOWNLOAD. REINSTALLATION IS
AVAILABLE THROUGH RS-232. SEE SECTION A.2.2.2.
A.2 LOADING SOFTWARE TO THE PVR 6000
THROUGH THE
SERIAL PORT
A.2.1.1 PC Connection to the Serial Port
The PVR 6000 can be controlled from a standard PC through a serial RS-232 or
RS-485 cable. Table A- and Table A-2 detail the pin-to-pin and signal
assignments of the RS-232 and RS-485 cables, respectively.
Table A-1: RS-232 Control Cable Pin-to-Pin
9 PIN D-TYPE CONNECTOR
(PC)
9 PIN D-TYPE CONNECTOR
(IRD)
SIGNAL DESCRIPTION
2 3 Pc-RxD
3 2 Pc-RxD
5 5 GND
To Next Page
Loading...
