2-26 888-2629-200 10/6/10
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation
Maxiva ULX COFDM Series
Figure 2-6 Photo of MOV & TB1
Figure 2-6 shows an AC distribution panel removed from the transmitter. TB1 in this
case is for an amplifier cabinet with 8 modules or less.
NOTE:
The dashed rectangles in Figure 2-7 and 2-8 indicate jumpers that need to be
moved to change between 208-240V and 380-415V operation.
TB1
MOV
Jumper
To Next Page
Loading...
