HBM MX440B - Page 198

FAQ
198 I3031-14.0 HBM: public Quantum
X
Operation in LAN
1. No server in the network, the PC has no setting or
uses DHCP, the QuantumX module has a permanent
address
No connection can be set up with this combination.
2. DHCP server in the network, the PC has a permanent
address or uses DHCP, the QuantumX module has a
permanent address
A connection can normally only be set up when the
PC and QuantumX module addresses lie in the same
subnet, i.e. the IP address may only have different
digit groups where a 0 is present in the subnet mask.
Also refer to Changing the Ethernet interface para
meters of the QuantumX