FAQ
Quantum
X
I3031-14.0 HBM: public 197
If no module appears, there are several possible causes.
Check the following points and then repeat the search.
S Have you activated the correct interface or correct
interface adapter?
S Check the Scan options in the 'Module suchen' dialog.
S Does your Ethernet switch work properly?
If you are not operating any other devices on the
switch with which you can check the function, try to
set up a direct connection between the PC and the
QuantumX module.
S If you want to use the QuantumX module in a larger
network, please contact your network administrator.
There are a series of options in administrated net
works to limit or completely prevent data transmission
between individual subscribers. Administrative en
abling may also be necessary here.
To Next Page
Loading...
