Connecting individual QuantumX modules
70 I3031-14.0 HBM: public Quantum
X
Ethernet settings: adjust the IP address of your PC
If you want to operate the modules with a fixed, static IP
address, you should use the "Alternative Configuration"
(fixed IP address and subnet mask, userdefined) in the
Ethernet adapter properties under TCP/IP the ”Alternat
ive Configuration” in the TCP/IP properties (fixed IP ad
dress and subnet mask, user-defined)!
Edit the PCs settings as follows:
S Open the network connections (Start/Settings/Net
work connections).
S Mark your LAN connection with a right-click and select
“Properties” in the context menu.
S Select the
“General” tab and under“This connection
uses the following items” mark Internet (TCP/IP).
Click on the “Properties” button.
To Next Page
Loading...
