11 Commissioning
PHLOX - Ignition Control System 93
11.4 Ignition start
When the engine is started, the ignition can be set up to start in 2 different ways:
Start-type 1 (Par. 250 = 1):
When configured as start-type 1, ignition begins as soon as speed (Par. 2000) exceeds
StartSpeed1 (Par. 255).
Start-type 2 (Par. 250 = 2):
When configured as start-type 2, ignition begins when speed (Par. 2000) exceeds
StartSpeed1 (Par. 255) and after the StartDuration1 delay (Par. 265) or when speed ex-
ceeds StartSpeed2 (Par. 256) immediately.
To Next Page
Loading...
Need help?
General
