1 Safety Instructions and Related Symbols
PHLOX II Ignition Control System 1
1 Safety Instructions and Related Symbols
This publication offers practical safety instructions to indicate the unavoidable residual risks
involved when operating the machine. These residual risks involve hazards to
- Personnel
- Product and machine
- The environment
The primary aim of the safety instructions is to prevent personal injury!
The signal words used in this publication are specifically designed to direct your attention to possi-
ble damage extent!
DANGER indicates a hazardous situation which will lead to fatal or severe
injuries if it is not prevented.
WARNING indicates a hazardous situation which could lead to fatal injury
or severe injuries if it is not prevented.
CAUTION indicates a hazardous situation which could lead to minor inju-
ries if it is not prevented.
NOTICE indicates possible material damage.
Safety instructions are not only denoted by a signal word but also by hazard
warning triangles. Hazard warning triangles can contain different symbols
to illustrate the danger. However, the symbol used is no substitute for the
actual text of the safety instructions. The text must therefore always be read
in full!
This symbol does not refer to any safety instructions but offers important
notes for better understanding the functions that are being discussed. They
should by all means be observed and practiced.
To Next Page
Loading...
Need help?
General
