3 Operation, Maintenance and Service
PHLOX II Ignition Control System 7
3 Operation, Maintenance and Service
Risk of fire and serious burns from flammabel chemicals!
Never clean engine with flammable cleaners
Housing of PHLOX-II gets hot when engine is runnings!
Never touch PHLOX-II housing bare-handed when engine is
running or has been switched of recently.
Use safety gloves or let cool down the unit before touching
The system must be operated in such a way to reliably pre dam-
age of any type.
In particular, the system may be operated only within the electri-
cal and technical ranges indicated in the specification.
All components should be checked regularly for signs of wear,
damage and should be checked regularly.
Repairs to HEINZMANN devices may only be carried out on the
manufacturer’s premises!
The devices may in no case be opened by the customer!
The PHLOX II system is designed so that it does not require maintenance or upkeep. Nev-
ertheless, the state of all components such as cables, connectors, coils, leads, rails and sen-
sors should be checked regularly for signs of damage or wear.
To Next Page
Loading...
Need help?
General
