Heinzmann PHLOX II IC-08 User Manual

14 Error Handling
PHLOX - Ignition Control System 209
3086 ErrIntVoltSupply
Error
Meaning
0
Error of 1.5V reference Voltage too low
- Internal 1.5V reference voltage is too low.
 only error message
1
Error of 1.5V reference Voltage too high
- Internal 1.5V reference voltage is too high.
 only error message
2
Error of 3.3V reference Voltage too low
- Internal 3.3V reference voltage is too low.
 only error message
3
Error of 3.3V reference Voltage too high
- Internal 3.3V reference voltage is too high.
 only error message
4
Error of 12V reference Voltage too low
- Internal 12V reference voltage is too low.
 only error message
5
Error of 12V reference Voltage too high
- Internal 12V reference voltage is too high.
 only error message
6
Error of 7V reference Voltage too low
- Internal 7V reference voltage is too low.
 only error message
7
Error of 7V reference Voltage too high
- Internal 7V reference voltage is too high.
 only error message
8
Error of 5V reference Voltage too low
- Internal 5V reference voltage is too low.
 only error message
9
Error of 5V reference Voltage too high
- Internal 5V reference voltage is too high.
 only error message
10
Error of -1.5V reference Voltage too low
- Internal -1.5V reference voltage is too low.
 only error message

Heinzmann PHLOX II IC-08 Specifications

General

Brand	Heinzmann
Model	PHLOX II IC-08
Category	Control Systems
Language	English