Heinzmann PHLOX II IC-08 User Manual

6 Installation
PHLOX II Ignition Control System 39
Range
Ignition outputs refer to engine-ground: up to 280 V pick, up to 60 A pick.
Connected to
PHLOX, ignition rail A (left) and ignition rail B (right), optional wire-terminals in
control cabinet or junction box.
Type of cord used
Wire 1.5 ... 2.5 mm
2
, unshielded. See requirements for installation.
Total cable length
< 30 m
Note
Incorporated in the output cable harness for PHLOX II, cable to the control cabinet
Use by test
See test arrangement

Heinzmann PHLOX II IC-08 Specifications

General

Brand	Heinzmann
Model	PHLOX II IC-08
Category	Control Systems
Language	English