HeMaTech 3925-0050 - Page 132

Technical Data Appendix
EN 3925-0060 V207-00 MANUAL R03.doc
HeMaTech Prüftechnik
132
Interfaces
1 parallel interface (machine control)
(maximum 96 digital inputs/outputs)
Control inputs
1 bit each for Automatic, Machine ready, Start, Leak
simulation ON/OFF, Flooding and Abort
8 bit program selection
Control outputs
1 bit each for Ready for operation, Ready for test,
Error, No leak, Rework, Leak, Measuring
Serial interfaces, max.
4, depending on
design
RS 232C, RS 422 **, RS 485 **, Profibus **:
for transfer of parameters, counter counts and
measuring values, external configuration,
only for external control (via Profibus)
Structure
19 inch plug-in device 3 HE
for special versions 6 HE
Dimensions
3HE 590 × 165 × 456 mm (W × H ×D)
for special versions
6HE 590 × 300 × 456 (only for standard housing),
T (with front door = 496)
Electric power supply
100-240 V , 50/60 Hz (without system transfer)
Device protection
Fuse unit 1× 2.0 AT (5 × 20 mm slow)
Order-number: 8834-0313
Power input
maximum 100 VA
Supply air
min. 5 bar/ü or 1,5 bar/ü > test pressure,
max. 10 bar/ü, dry, oil free and filtered
Connections
Supply air connection G 1/4
Test connection G 1/8 (optional G 3/8)
Venting
via silencer G 1/4
Weight
approx. 24 kg
Order-number
3 925-0050
(Subject to alterations)
** Option