Hi-Target HTS-420R - Page 107

Total Station Manual
- 106 -
the “T.H.” field in
[COGO-Meas], then
aim the prism and
press [F1] (ALL) or
[F2] (DIST) + [F3]
(REC) to measuring
and saving the point
for traverse
calculation.
COGO-Meas.
ALL
[COGO-Meas]
DIST REC EDM
1.500 m
Pt. ： 8
T.H. ：
HA ： 153°15′10″
VA ： 22°35′40″
： -----.--- m
1
B: Press [F1](List) in
[Traverse] screen, use
the key [▲]\[▼] to
select a Known point
in the point list for
traverse calculation,
then press [F4](OK) to
be selected.
[F1](List)
+
[F4](OK)
B: Select the point by list in the memery.
[Find Pt.] 1/50
DEFAULT Station
View
Coord.
Job OK
STN1 Station
200007 Meas. PT
200008 Meas. PT
100 Fix Pt.
C: Input the name of
known point and
press [F3](Find) to
find whether the
point is in memory, if
exist, then press
[F4](OK) to be
selected for
calculating; if not
exist, then need to
input or measure the
point.
Input name
+
[F3](Find)
+
[F4](OK)
C: Input the name of the point and find
whether it is in memory.
[Find Pt.] 1/3
1 Station
View
Coord.
Job OK
1 Meas. PT
1 Fix Pt.
D: Press [F2](Coord.)
to input a known
point that not exist in
memory.
[F2](Coord.)
+
Input
Coord.
+
[F4](OK)
D: Input the point through keyboard.
[Input Coord.]
Job : DEFAULT
Pt. :
X : 0.000 m
Y : 0.000 m
Z : 0.000 m
Back
OK
DEFAULT