Hi-Target HTS-420R - Stakeout; Set Stakeout Point

Total Station Manual
- 72 -
6. Stakeout
The Stakeout Application can calculate lofting elementsbase on lofting point’s
coordinate or manually input angle or horizontal distance. The application can
continuously display differences, between current position and desired stake out
position.
Steps of Stakeout :
1. Set the job.
2. Set the station
3. Set the orientation
4. Extractecoordinates from memory. The coordinates may be a measured
point or a manually entered fix point.
5. Start staking out. There are three ways to choose: Polar Stakeout mode,
Orthogonal to StationStakeout mode, Cartesian Stakeoutmode.
6.1 Set Stakeout Point
 Extractecoordinates from job
Steps
Key
Display
○
1 After finishing setting
the job, setting the
station and setting the
orientation, press [F4] to
startstaking out in the
Pre-Setting menu. ※
1
[F4]
[Stakeout]
[*] F1 Set Job (1)
[*] F2 Set STA (2)
[*] F3 Set B.S. (3)
F4 Start (4)
F1 F2 F3 F4
○
2 Input the name of
stakeout point in the
Search item. Press [ENT]
to start Find Point
function. (Or input
wildcard "*"to start the
wildcard search.)
Inputstakeout
point’s name
+
[ENT]
*
ALL DIST REC
[Stakeout] 1/3
Search :
Pt. :
T.H :
Hz : ←
: ---
: ---
5
1.500 m
-13°29′60″
------
------