Hi-Target HTS-420R - Data

Total Station Manual
- 70 -
○
4 Press [F1](ALL) or press
[F2](DIST) and [F3](REC) to
start measuring and record
the measured data.
[F1]
or
[F2]+[F3]
SP1
ALL Data
[Surveying] 1/3
IndivPt :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
<<<<<<
IndivPt
○
5 Finish measuring,
application turn off the
function of measuring
individual point and then
continue to display the
consecutive point name.
2
ALL Data
[Surveying] 1/3
IndivPt :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
IndivPt
5.2 Data
[Data]：
Look over the measured datas which are saved in current job.
Steps
Key
Display
○
1 Press [F4]( ↓ ) twice to
display the last page of soft
keys.
[F4]
1
ALL DIST REC
[Surveying] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
：
1.500 m
13°29′59″
90°59′23″
ALL Code EDM
ALL Data
IndivPt
○
2 Press [F3](Data) to start
view measured point function.
[F3]
2
ALL Data
[Surveying] 1/3
IndivPt :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
IndivPt