Hi-Target HTS-420R - Creating a New Job

Total Station Manual
- 142 -
○
2 The interface displays the
job list in the current storage.
The jobs in the SD card have
the mark of “[SD]” and the
current job have the mark of
“*”.
Delete
New View OK
[Job list]
JOB1 *
JOB2
JOB3 [SD]
JOB4 [SD]
○
3 Using the direction keys to
select a job, when the
needed job is selected, press
the key of [F4], the program
gives a prompt of “Job Set”
and open the job as the
current job.
[↑]、
[↓]
+
[F4]
Delete
New View OK
[Job list]
JOB1
JOB2 *
JOB3 [SD]
JOB4 [SD]
1.2 New a Job
Steps
Key
Display
○
1 In the menu of Job
Manager, press [F1] to enter
the menu of job function.
[F1]
[Job Manage] 1/2
F1 F2 F3 F4
F1 Job (1)
F2 Fix Pt. (2)
F3 Meas. PT (3)
F4 Code (4)
○
2 The interface displays the
job list in the current storage.
The jobs in the SD card have
the mark of “[SD]” and the
current job have the mark of
“*”. Press [F2] (New) to enter
the function of newing a job.
Delete
New View OK
[Job list]
JOB1 *
JOB2
JOB3 [SD]
JOB4 [SD]