Hi-Target HTS-420R - Wildcard Point Searching

Total Station Manual
- 22 -
○
6 Press key F4 to search the
point in the selected job.
[F4]
[Find Pt.] 1/1
B1 Fix Pt.
View Job OK
Coord.
※
1
[F2](Zero)：Set N, E, Z to 0.
[F3](Coord.)：Input point manually.
[OK] Commit selected point.
8.2 Wildcard search
The wildcard search is indicated by a “*”. The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is
not fully known, or to search for a batch of points.
Examples：
* All points are found.
A All points with exactly the point number “A” are found.
A* All points containing “A” are found, for example, A1, A2, 1A.
Steps: (For example “*”)
Steps
Key
Display
○
1 Choosing ‘Survey’ in
application menu, then
choose function ‘Set STA’.
Entering “*”, pressing ENT to
finish input, then pressing F1
to search.
[F1]
[Set STA]
Input STA PT!
Station :
*
Find List
Coord.
○
2 In searching result
window, using arrow key ↑
↓to move cursor to select
point number. Press key F4 or
ENT to conirm selecting.
↑↓
[F4]
[ENT]
[Find Pt.] 1/5
A1 Station
View Job OK
A2 Station
A3 Meas. PT
B4 Meas. PT
C0 Fix Pt.
Coord.