Hi-Target HTS-420R - Page 120

Total Station Manual
- 119 -
○
2 Set the known
point one by one.
※ There are four ways
to get the known
point for LNLN
calculation. Please
refer to the step
○
2 in the “COGO
Traverse”.
Set the
known
points
Meas.
[LNLN]
Result Find ↓
偏置模式 :
8
Input data!
PT1 ：
PT2 ： 10
PT3 ： 9
PT4 ： 5
○
3 When all of the
points are set correctly,
press [F2](Result) to
calculate the
intersection point and
show the results.
Input the name of
result point in the
[LNLN Result] and
press [F4](REC) to save
the point.
[F2]
[LNLN Result]
REC
Pt. ： 10
N ： 6.369 m
E ： 10.536 m
※ In all of the above operation, press [ESC] to return to the previousmenu.
※ The result point is plane data.