Hi-Target HTS-420R - Page 122

Total Station Manual
- 121 -
[F1]
or
[1]
F1
[Offsets]
F2
偏置模式 : 偏置模式 :
F1 DistOff (1)
F2 Set Pt (2)
○
2 Set the start point,
end point and offset
point one by one.
※There are four ways
to get the known
point for DistOff
calculation. Please
refer to the step
○
2 in the “COGO
Traverse”.
Set the
known
points
Meas.
[Get Foot PT]
Result Find ↓
偏置模式 :
8
Define baseline!
PT1 ：
PT2 ： 9
Input Offset PT!
PT3 ： 10
○
3 When all of the
points are set correctly,
press [F2](Result) to
calculate the
intersection point and
show the results.
Input the name of
result point in the
[DistOff Result] and
press [F4](REC) to save
the point.
[F2]
+
[F4]
[DistOff Result]
REC
ΔLength： 5.310 m
ΔTrav. ： 2.249 m
Pt. ： 11
N ： 6.369 m
E ： 10.536 m
※ In all of the above operation, press [ESC] to return to the previousmenu.
※ The result point is plane data.