Hi-Target HTS-420R - Page 160

Total Station Manual
- 159 -
○
2 In “Import
Data”mene, press [F1]
or [1] entering “Import
Fix Pt” window.
[F1]
or
[1]
Job
[Import Fix PT]
Import
Mode ：
Target Job； DEFAULT
RS232C
○
3 Press [F1](Job) to
select the job you want
transfer data into, then
press [F4] (OK).
[F1]
[F4]
[Select Job]
JOB1 *
JOB2
JOB3
JOB4 [SD]
View New OK
○
4 If choosing RS232C
method, using cable to
connect instrument
and computer first, on
computer side, press
button [Send] in
transfer software, and
then press [F4]
(Import) on the
instrument.
[F4]
Job
[Import Fix PT]
Import
Mode ：
Target Job； DEFAULT
RS232C
Imported：91
○
5 If choosing
UDiskmethod, plugging
udisk in the instrument
usb port fisrt, then:
1. Press [◄], [►] key
to select “UDisk”;
2. Press [F2] to explore
files in udisk and select
the data file.
3. Press [▼], [▲]
moving to the format
option, then press [◄],
Job
[Import Fix PT]
Source Import
Source ： JOB1
Format ： CASS Format
Mode ：
Target Job； DEFAULT
UDisk
Imported：91