Hi-Target HTS-420R - Page 165

Total Station Manual
- 164 -
Key Beep
The beep is an acoustic signal after each key stroke.
On: Enable beep.
Off: Disable beep.
Sector Beep
On: Sector Beep sounds at right angles(0°, 90°, 180°, 270°
or 0, 100, 200, 300 gon).
Off: Sector Beep diabled.
Tilt
On: Tilting compensation enable.
Off: Tilting compensation disable.
Hz increment
Right: Set horizontal angle to clockwise direction measurement.
Left: Set horizontal angle to counter-clockwise direction
measurement.
V-Setting
Zenith: Zenith = 0°; Horizon = 90°.
0°
90°
180°
270°
Horiz.0: Zenith = 270°; Horizon = 0°。
270°
0°
90°
180°
Vert90: Zenith = 90°; Horizon = 0°;
Positive above horizon, negative below horizon.