Hi-Target HTS-420R - Page 32

Total Station Manual
- 31 -
2. The enter range of the average height above sea level: -9999.9999~9999.9999. The
average altitude retained after the decimal point one, the default value is 0.
Steps
Key
Display
○
1 After entering to the
interface of EDM Setting,press
the key of [F4] to enter the
second page of soft key, then
press te key of [F1](Grid) to
set the Grid Scale.
[F4]
[F1]
[EDM Setting]
EDM Mode:
Reflector:
P.C. :
Grid Signal
Single
Prism
30.0 mm
○
2 Interface displays the
current setting.Enter the
values of Scale and Altitude
then press the key of
[ENT].Program calculates the
Grid Scale and displays it in
the interface.If you want to
set all enter area to 0,you can
set the key of [F1] (Reset).
[ENT]
[Grid Scale]
Scale :
Altitude:
Grid Scale
Reset OK
1.0000
0.000 m
1.0000
○
3 After finished setting,
press [F4](OK) to save settins
and back to previous
menu.Then press the key of
[F3](OK) to save the setting of
EDM and back to the function
of measurement.
[F4]
[EDM Setting]
EDM Mode:
Reflector:
P.C. :
Grid Signal
Single
Prism
30.0 mm