Hi-Target HTS-420R - Page 36

Total Station Manual
- 35 -
to go back.
B
If want other value of angle as
the orientation angle,you
need to enter the wanted
value of angle and press
[ENT]，then press [F4](OK).
Example: enter 121.2030
(121°20′30″).
C：
If want to set HA to 0,press
[F1]( Zero) and the value in
the edit text of HA becomes
0 ° 00 ′ 00 ″ .Then press
the key of [F4] (OK).
[F4]
[F1]
+
[F4]
Zero OK
[SetHA]
HA : 359°39′01″
B：Input angle
Zero OK
[SetHA]
HA : 121°20′30″
C：[Zero]
Zero OK
[SetHA]
HA : 0°00′00″
○
3 Back to the function of
Q-Survey, the value of HA just
set displays in the interface.
Here take an example of
setting HA to zero.
[F4]
[F1]
A1
Zero
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
0°00′00″
90°59′23″
Station SetHA