Hi-Target HTS-420R - Page 52

Total Station Manual
- 51 -
○
3 Inputting the correct
value of Rod length and
pressing [F4] to back to
measure the first prism
point.
[F4]
[Rod Length]
OK
R1-R2 :
Error Limits:
偏置模式 :
1.000 m
0.001 m
偏置模式 :
Rod length : 3.000 m
○
4 The instrument aims at
the prism on the top and
pressing [F1] to finish
measuring the first prism
and enter the interface of
measuring the second
prism.
[F1]
or
[F2]
+
[F3]
ALL
[Hidden Point]
DIST REC ROD/ED
HA :
VA :
:
偏置模式 :
89°51'16"
12°35'45"
偏置模式 :
Meas. target 1!
12.235 m
Pt. :
1
1
○
5 Aim at the second prism
and press [F1] to finish the
second prism’s
measurement. Start to
calculate the information of
hidden point now. If the
error is beyond the set
value, enter the step
○
6 of
giving a prompt of error,
otherwise, enter step
○
7
to display the result of
hidden point measurement.
[F1]
or
[F2]
+
[F3]
ALL
[Hidden Point]
DIST REC ROD/ED
HA :
VA :
:
偏置模式 :
89°51'16"
12°35'45"
偏置模式 :
Meas. target 2!
12.235 m
Pt. :
2
1
○
6 A prompt of error. Press
[F1] to enter the step
○
7 to
display the result of hidden
point measurement, press
[F4] to back to the step
○
2 。
[F1]
or
[F4]
Accept
[Hidden Point]
New
Error Limits:
Error :
偏置模式 :
0.050 m
0.065 m
偏置模式 :
Overrange