Hi-Target HTS-420R - Page 93

Total Station Manual
- 92 -
○
2 After finishing setting
job, station and orientation,
press [F4] in the Pre-Setting
menu to go to Select Tie
Distance Mode screen.
[F4]
F1
[Tie Distance]
F2 F3 F4
偏置模式 : 偏置模式 :
[*] F1 Set Job (1)
[*] F2 Set STA (2)
[*] F3 Set B.S. (3)
F4 Start (4)
○
3 Press [F1] to select the
Polygonal tie distance.
[F1]
F1
[Tie Distance]
F2
偏置模式 :
F1 Polygonal
F2 Radial
(1)
(2)
○
4 Start to measure the first
target point. Aim at the first
target point and press
[F1](ALL) or [F2](DIST) +
[F3](REC) to finishing
measurement. ※
1
PAGE1
Press
[F1]
or
[F2] +
[F3]
ALL
[Polygonal]
DIST REC ↓
偏置模式 : 偏置模式 :
PT1 :
T.H. : 1.500 m
: 3.563 m
: 3.563 m
1
1/3
1
Find
[Polygonal]
List Coord. ↓
偏置模式 : 偏置模式 :
PT1 :
T.H. : 1.500 m
: 3.563 m
: 3.563 m
1
1
2/3
EDM
[Polygonal]
|←
偏置模式 : 偏置模式 :
PT1 :
T.H. : 1.500 m
: 3.563 m
HA : 125°14′53″
VA : 85°35′42″
1
1
3/3