HIKVISION iDS-9000HQHI-M8/S Series - Page 11

Note
The baery posive terminal (+ idenes the posive terminal) should be placed upward.
Figure 1-2 Replace Baery
5.
Reinstall the device chassis cover.
What to do next
If the system me is incorrect, please go to congure the me.
HDD
Installaon
Disconnect the power from the device before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installaon.
Tools Required: Screwdriver.
Bracket
Installaon
Bracket installaon is applicable when it requires to remove the device cover, and install HDD on
the internal bracket.
Steps
1.
Unfasten screws on the back, and push the cover backwards to remove the cover.
Digital Video Recorder User Manual
x