Figure 1-3 Remove Cover
2.
Fix the HDD on the bracket with screws.
Note
Please uninstall the upper layer bracket rst before installing HDD on the lower layer bracket.
Figure 1-4 Fix HDD
3.
Connect the data cable and power cable.
Figure 1-5 Connect Cable
Note
You can repeat the steps above to install other HDDs.
4.
Reinstall the device cover and fasten screws.
Front Panel Plug-Pull
Installaon
Front panel plug-pull installaon is applicable when you need to open the device front panel with
key and install the HDD.
Digital Video Recorder User Manual
xi