ENGINE (J05E)/TROUBLESHOOTING2–394
1. Perform engine warm up. (engine coolant temperature: 80 C {176
F} or more)
2. Stop the engine.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if any followings DTCs (cylinder #1:
P0263, #2: P0266, #3: P0269 and #4: P0272) have been detected.
1. Set the starter key to the "LOCK" position.
2. Replace common rail assembly.
3. Perform the engine warm up. (engine coolant temperature: 80 C
{176 F} or more)
4. Stop the engine.
5. Set the starter key to the "ON" position.
6. Select [Engine] and check if any followings DTCs (cylinder #1:
P0263, #2: P0266, #3: P0269 and #4: P0272) have been detected.
7
Check the DTC detected 4 (engine ECU)
Have any DTCs (cylinder #1: P0263, #2: P0266, #3: P0269 and #4: P0272) been detected?
Go to step 8. Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
8
Replace the common rail assembly
Have any DTCs (cylinder #1: P0263, #2: P0266, #3: P0269 and #4: P0272) been detected?
Go to step 9. Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
To Next Page
Loading...
Need help?
General
