Hino Motors HINO 195 series User Manual

ENGINE (J05E)/TROUBLESHOOTING 2–731
INSPECTION PROCEDURE: P0A7B
1. Set the starter key to the "LOCK" position.
2. Connect the diagnostic system (HINO DX Ⅱ ) to the vehicle.
3. Set the starter key to the "ON" position.
4. On the screen of the diagnostic system, select [Engine], and read
the detected DTC.
NOYES
1
Check the DTC detected [HINO DX Ⅱ ]
SHTS021270300667
Has DTC P0A7B been detected?
Go to DTC-specific troubleshooting for the
hybrid system (HV ECU).
Procedure completed.

Hino Motors HINO 195 series Specifications

General

Brand	Hino Motors
Model	HINO 195 series
Category	Trucks
Language	English