82
_____________________________________________________________________
5.3 Setting Items
______________________________________________________________
Flashing cursor
NOTE
When recording length is set to "Cont." (continuous), data remaining in
internal memory is saved when measurement stops.
Data for the channel for which the waveform is displayed is saved.
During measurement, if remaining PC card capacity runs low enough for
a warning message to appear, press the STOP button, then remove the
PC card once measurement has been suspended. Data may be lost if the
PC card is inserted or removed during measurement.
Files will be saved in the currently selected directory.
(4) Enable thinning.
When the text data format is selected, enable thinning.
Move the flashing cursor to
Thin Out
and use the
buttons to make a setting.
To Next Page
Loading...
