109
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Normal Instantaneous
Waveform Recording
Sequential Save Recording
Function
Only one waveform
is recorded
Multiple waveforms can be recorded
Flashing cursor
(6) Set Sequential Save on or off.
During normal recording, only one waveform can be
recorded, as the recording memory is cleared each time a
trigger occurs and input starts.
The Sequential Save function allows multiple waveform
recordings to be saved.
(7) Display the Extended Status Screen.
1. Press the
SET
button to display the Status (RMS) Screen.
2. When Instantaneous Waveform Recording is enabled, the
Extended Status
is displayed.
3. Move the flashing cursor to
Extended Status...
and display
the Ex Status Screen using the
buttons.
To Next Page
Loading...
