Hioki 8808-51 - Page 134

110
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Flashing cursor
Flashing cursor
(8) Set Sequential Save to ON or OFF.
For details, refer to Section 4.8.3.
To return to the Status Screen, move the flashing cursor to
Back
, and press the buttons.
Instantaneous Waveform Recording Display
With normal recording, the instantaneous waveform can be
displayed by selecting the Memory function on the
Waveform Screen.
Refer to Section 4.8.3 regarding waveforms that were
recorded by Sequential Save.