249
_____________________________________________________________________
12.3 Settings on the File Screen
______________________________________________________________
Auto save Waveform data,
screen data
Waveform
calculation result
[AUTO ]
[AUTO0001]
[AUTO0002]
[AUTO0100]
[AUTO0100]
[AUTO5000]
[NONAME ]
[NONAME01]
[NONAME02]
[NONAME10]
[NONAM100]
[NONA5000]
[MEASURE1]
[MEASURE2]
[MEASUR10]
[MEASU100]
[MEAS5000]
Automatic file name assignment
If the file name is entered as a blank [ . ], it is assigned
automatically according to the following principle.
z Waveform File Size (unit: byte)
File Size = Header Size + Data Size
Fractional values are ignored.
z In the memory recorder function (Binary data)
Size of a header = 512 x (4 +number of analog channels
+number of logic probes)
Size of a data = {2 x number of analog channels +(number
of logic probes +1)/2} x (recording length [DIV] x 80 +1)
z In the recorder and RMS recorder function (Binary
data)
Size of a header = 512 x (4 +number of analog channels
+number of logic probes)
Sizeofadata=(4x number of analog channels +number of
logic probes) x (recording length[DIV] x 80 +1)
z In the memory recorder function (Text data) (Intended
as a guide only)
Size of a header = 170+27 x number of analog channels+64
x number of logic probes
Size of a data = (14+13 x number of analog channels+9 x
number of logic probes x (recording length[DIV] x 80 +1)
To Next Page
Loading...
