68
_____________________________________________________________________
4.9 Numerical Calculation (Measurement)
______________________________________________________________
Flashing cursor
Full Screen Display
Partitioning Display
NOTE
Refer to Section 9.5 for information about waveform display
area setting.
Numerical calculation results cannot be displayed when the
Settings window is open on the Waveform Screen: press the
Channel select button (CH1 to CH4) to close the Settings
window to display calculation results.
(7) Execute numerical calculation (with existing data)
Calculates the data stored in memory and read from a PC
card.
Move the flashing cursor to
Execute
and use the
buttons to make a setting.
Operational Example of Numerical Calculation
To Next Page
Loading...
