10.2 Basic Specifications
197
10
10
Chapter 10 Specifications
9. External Interface Specifications
8. Display Specifications
Languages Japanese, English, Simplified Chinese
Display type 9-inch TFT color LCD (800×480 dots)
Dot pitch 0.246(V) mm ×0.246(H) mm
LCD backlight Always ON, Auto OFF (after 1/5/10/30/60 minutes)
Display numerical resolution 99999 counts (other than the integrated value)
999999 counts (Integrated value)
Display refresh interval Measurement values: 200 ms (independent of internal data update interval)
Waveforms, FFT: Screen-dependent
Screens Measurement, Setting, and File Operation screens
(1) USB Interface (Functions)
Connector Mini-B receptacle
Compliance standard USB2.0 (Full Speed/High Speed)
No. of ports 1
Class Individual (USB488h)
Connection destination Computer
Windows 7 (32bit, 64bit)/Windows 8 (32bit, 64bit)/Windows 10 (32bit, 64bit)
Function Data transfer and command control
Not for simultaneous use with Ethernet: USB has priority when both interfaces used
(2) USB Memory Interface
Connector USB type A connector
Compliance standard USB2.0
USB power supply 500 mA maximum
No. of ports 1
USB storage device support USB Mass Storage Class
Recordable content Save and load settings files
Save measurement values (CSV format)
Copy measurement values and recorded data (from CF card)
Save waveform data
Save FFT spectrum for noise measurement
Save and load screen captures
(3) LAN Interface
Connector RJ-45 connector × 1
Compliance standard IEEE802.3 compliant
Transmission method 10BASE-T/100BASE-TX Auto detected
Protocol TCP/IP
Function HTTP server (remote operation),
Dedicated port (data transfer and command control)
Not for simultaneous use with USB (functions): USB has priority when both interfaces used
(4) CF Card Interface
Slot One Type 1
Compatible card Compact Flash memory card (32 MB or higher)
Supported memory capacity Up to 2 GB
Data format MS-DOS format (FAT16/FAT32)
Recordable content Save and load settings files
Save measurement voltage and auto-recorded data (CSV format)
Copy measurements/recorded data (from USB storage)
Save waveform data
Save FFT spectrum for noise measurement
Save and load screen captures
To Next Page
Loading...
