Hioki RM3542 - Page 138

9.7 Message Reference
132
Decision Mode Setting
Syntax
Command
:CALCulate:LIMit:MODE <ABS/ REF>
Query
Response
:CALCulate:LIMit:MODE?
<ABS/ REF>
<ABS> = Upper threshold/Lower threshold comparison
<REF> = Reference percentage/tolerance comparison
Example
:CALC:LIM:MODE REF
Set and Query ABS Mode Upper/Lower Comparator Threshold Values
Syntax
Command
:CALCulate:LIMit:ABS <Upper threshold>,<Lower threshold>
Query
Response
:CALCulate:LIMit:ABS?
<Upper threshold>,<Lower threshold>
<Upper threshold> = 0 to 120.000E+6 (NRf)
<Lower threshold> = 0 to 120.000E+6 (NRf)
Example
:CALC:LIM:ABS 1.00035,0.99965
Set and Query REF% Mode Reference Resistance
Syntax
Command
:CALCulate:LIMit:REFerence <Reference Resistance>
Query
Response
:CALCulate:LIMit:REFerence?
<Reference Resistance>
<Reference Resistance> = 0 to 120.000E+6 (NRf)
Example
:CALC:LIM:REF 1.2E+3
Set and Query REF% Mode Upper/Lower Comparator Threshold Percentages
Syntax
Command
:CALCulate:LIMit:PERCent <Upper threshold (%)>,<Lower
threshold(%)>
Query
Response
:CALCulate:LIMit:PERCent?
<Upper threshold (%)>,<Lower threshold (%)>
<Upper threshold (%)> = -99.990 to 99.990 (NR2)
<Lower threshold (%)> = -99.990 to 99.990 (NR2)
Note
Setting resolution is 0.01% for ±10.00% or more.
Example
:CALC:LIM:PERC 1.505,-2.005
Queries the comparator result
Syntax
Query
Response
:CALCulate:LIMit:RESult?
<HI/ IN/ LO/ OFF/ ERR>
Example
:CALC:LIM:RES?
HI