QoS/Priority
132
5.5
Queue Management
RM Web
Release
6.0
07/2010
5.5.3 Maximum bandwidth
By entering a maximum bandwidth you can limit the bandwidth for each traffic
class to a maximum value, regardless of whether you selected "Weighted
Fair Queuing" or "Strict Priority".
X Weighted Fair Queuing (see page 131) requires that the maximum
bandwidth is at least as big as the minimum bandwidth.
X With "Strict Priority", individual high-priority packets with low latency are
processed (see on page 131 “Strict Priority“). If the maximum bandwidth
is configured to a value less than 100%, even data packets will lower
traffic classes can be sent in periods of high-priority packet overload.
The weighting values range from 0% to 100% of the available bandwidth,
in steps of 5%.
To Next Page
Loading...
Need help?
General
