Security
RM Web L3E
Release
6.0
07/2010
2.3
Telnet/Web/SSH Access
49
2.3.1 Description of Telnet Access
The Telnet server of the device allows you to configure the device by using
the Command Line Interface (in-band). You can deactivate the Telnet server
if you do not want Telnet access to the device.
On delivery, the server is activated.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is kept.
Note: The Command Line Interface (out-of-band) and the
Security:Telnet/Web access dialog in the Web-based interface allow
you to reactivate the Telnet server.
2.3.2 Description of Web Access
The Web server of the device allows you to configure the device by using the
Web-based interface. Deactivate the Web server if you do not want the
device to be accessed from the Web.
On delivery, the server is activated.
After the Web server has been switched off, it is no longer possible to log in
via a Web browser. The login in the open browser window remains active.
Note: The Command Line Interface allows you to reactivate the Web server.
To Next Page
Loading...
Need help?
General
