Diagnostics
RM Web L3E
Release
6.0
07/2010
9.3
Ports
243
Figure 58: Port statistics table
9.3.2 Utilization
This table displays the network load of the individual ports.
In the “Upper Threshold[%]” column you enter the upper threshold value for
network load. If this threshold value is exceeded, the device sets a check
mark in the “Alarm” field.
In the “Lower Threshold [%]” column you enter the lower threshold value for
network load. If the current load falls below this threshold value, the device
removes the check mark previously set.
To Next Page
Loading...
